Using working flashing lights is mandatory. Remember, not putting a flashing light is punishable by 3 point on the permit as well as a traffic ticket . Although some law enforcement officials are sometimes lenient on this point. It is therefore essential to have flashing lights that work properly. We will therefore find out in this article how to replace the bulb of a turn signal for a Jeep Wagoneer, at the front and rear. It is also conceivable that the problem comes from a false contact, but it remains rather rare.change-flashing-Jeep-Wagoneer

Jeep Wagoneer: things to know before replacing its indicator

Firstly it is important to correctly buy your type of bulb! In order not to be mistaken, it is advisable to go to a spare parts website or to a garage which can order them for you. In a second step we will have to think about selecting the right color for the bulb. Then you will need to use a tools extremely basic but still necessary. You will therefore need a screwdriver for a Jeep Wagoneer. A cruciform and torx game and nothing can happen to you. Most of the time, the bulbs are at bayonet . To dismantle the damaged bulb, you will have to turn it a quarter of a turn anti-clockwise. To install the new bulb, you will therefore have to turn a quarter of a turn in the other direction.

How to change the bulb of a front indicator on a Jeep Wagoneer

There are two main ways to access the flashing lights. Indeed, it depends on the models, but access can be done either from the outside or from the inside on this Jeep Wagoneer. Access from inside the engine : First, you will have to open your hood. Then, you will have to remove the cover with the help of a screwdriver (regularly torx) to access the block of lights. When the block is unscrewed, remove it and it is possible to replace this bulb. Wheel arch access : Look below the wheel to see if the fasteners are there. When this is the case, you will have to disassemble the hooks and remove the screws using a screwdriver. Then remove the light block of this Jeep Wagoneer gently from the front. You simply need to replace your bulb and reattach the block the other way. Exceptionally, on certain cars it is conceivable to replace the block of lights from the outside. However, it is rather rare. When this is the case, with the help of a screwdriver you will have to remove the fasteners, release the block of lights quietly and replace your burnt out bulb.

How to change the bulb of a rear indicator on a Jeep Wagoneer

There are also two main ways to access the turn signal bulb. It depends on the models however the access can be done either from inside or from outside. Access from inside the trunk : Generally access can be done from inside the trunk. For these headlight blocks, there are screws and fasteners. Remove them and gently remove the part. Then you will simply have to replace this burnt out bulb with a new one. Then repeat the same manipulation in the other direction. It is also conceivable that access can be from the outside or through the wheel arch. However, it is much less frequent. Whatever happens, you will need to bring your screwdrivers and gently remove the entire headlight unit in order to replace the bulb. To reassemble, do the opposite manipulation.