Having turn signals that are in good condition is a legal requirement. Think about it, not putting a turn signal is punishable by 3 point on the permit as well as a fine . Even if some law enforcement officers are lenient at times on this subject. It is therefore necessary to have indicators that work properly. We will find out below how to change the bulb of a turn signal for an Opel Monza, front and rear. It is also conceivable that the concern comes from a false contact, but this remains quite exceptional.change-flashing-Opel-Monza

Opel Monza: things to know before changing your indicator

Firstly it is important to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to a car repairer who knows how to order them for you. Then you will have to think about selecting the right color for your bulb. Thereafter, you will need to use a tools very simple but still essential. You will therefore need a screwdriver for an Opel Monza. A cruciform and torx game and nothing can happen to you. Generally, the bulbs are at bayonet . To remove the damaged bulb, you will have to turn the bulb a quarter of a turn anticlockwise. To fix the new bulb, it is therefore necessary to turn it a quarter turn in the opposite direction.

How to change the bulb of a front indicator on an Opel Monza

We can find two different solutions to achieve the flashing lights. Indeed, it depends on the different models, but access can be done either from the outside or from the inside on your Opel Monza. Access from inside the engine : First, you will need to open the hood. Then, you will have to unscrew the cover with a screwdriver (regularly torx) to access the light block. As soon as the block is unscrewed, remove it and it is possible to change the bulb. Wheel arch access : Check below the wheel to see if the fasteners are there. If this happens, it is necessary to remove the fasteners and remove the screws with the help of your screwdriver. Then carefully remove the light block from this Opel Monza from the front. All you have to do is change your bulb and reattach the light block in the opposite direction. Less frequently, on certain cars it is conceivable to remove the block of lights from the outside. But it is quite rare. If this is what happens, with a screwdriver you will have to remove the fixings, gently remove the light block and change your defective bulb.

How to change the bulb of a rear indicator on an Opel Monza

There are also two different solutions for accessing this turn signal bulb. It depends on the models, however access can be done either from the inside or from the outside. Access from inside the trunk : Almost every time access can be done from inside the trunk. At the headlight blocks, there are screws and fasteners. Remove them and gently remove the part. Thereafter it will only be necessary to replace the defective bulb with a new one. Then repeat the same manipulation in the other direction. It is also conceivable that access can be from the outside or through the wheel arch. But it is much less frequent. Whatever happens, it is necessary to take your screwdriver and gently remove the entire block of lights in order to change your bulb. To put it in place, take the opposite step.