Having turn signals that are in good condition is mandatory. As a reminder, omitting a flashing light is punishable by 3 point on your driver's license as well as a fine . Although some police officers are indulgent from time to time on this subject. It therefore remains essential to have indicators in good condition. We will now find out how to change the bulb of a flashing light for an Opel Movano, front and rear. It is also conceivable that the problem comes from a short circuit, however it is quite exceptional.change-flashing-Opel-Movano

Opel Movano: things to know before changing your indicator

First of all it is essential to properly buy your type of bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your mechanic who will be able to select them. In a second step it is necessary to be careful to choose the right color of the bulb. Then you will need a tools very basic but nonetheless essential. You will therefore mainly need a screwdriver for an Opel Movano. A cruciform and torx game and nothing can happen to you. In most cases, the bulbs are at bayonet . In order to remove the damaged bulb, you need to rotate it a quarter of a turn to the left. So to install the new bulb, you will then have to rotate a quarter of a turn in the other direction.

How to change the bulb of a front indicator on an Opel Movano

There are two main solutions to achieve the indicators. It depends on the models, however access can be done either from the outside or from the inside on your Opel Movano. Access from inside the engine : To start, you need to open your hood. Then, it will be necessary to loosen a cover using a screwdriver (regularly torx) to access the block of lights. Now that the block is unscrewed, remove it and do not hesitate to change your bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. When this is happening, you will have to undo the fixings and remove the screws with a screwdriver. In the second step, remove the light unit from this Opel Movano slowly from the front. All you have to do is change the bulb and reattach the light block in the opposite direction. Exceptionally, on certain models it is conceivable to remove the block of lights from the outside. Nevertheless it is quite rare. When this is happening, using a screwdriver you will need to remove the fixings, gently release the light unit and change the defective bulb.

How to change the bulb of a rear indicator on an Opel Movano

There are also two main solutions for accessing the turn signal bulb. It depends on the models however access can be done either from the inside or from the outside. Access from inside the trunk : Generally access can be done from inside the trunk. For these light blocks, there are screws and fixings. Remove them and drop the block slowly. Then you will simply have to replace your defective bulb with a new one. Then repeat the same manipulation in the other direction. It is also conceivable that access can be from the outside or through the wheel arch. However, it is much less frequent. In all cases, you will have to take your screwdrivers and carefully remove the entire headlight unit in order to change the bulb. To reassemble, take the opposite step.