Having working flashing lights remains a legal requirement. Remember, not putting a flashing light is liable to 3 point on the permit as well as a traffic ticket . Although some law enforcement officers are occasionally sympathetic to this point. It is therefore essential to have flashing lights in good working order. We will therefore find out with this article how to change the bulb of a flashing light for a Seat Arosa, at the front and rear. It is sometimes likely that the problem comes from a short circuit, however it remains rather exceptional.
Seat Arosa: things to know before changing your turn signal
First of all, it's wiser to choose the right bulb model! In order not to be mistaken, we advise you to go to a spare parts website or to your garage who knows how to select them. Then you have to be careful to choose the right color of the bulb. Finally, you will need a tools very simple but still necessary. You will therefore mainly need a screwdriver for a Seat Arosa. A game of cruciform and torx and you will be able to do it. Almost every time, the bulbs are bayonet . In order to remove the damaged bulb, you will have to turn the bulb a quarter of a turn to the left. To put the new bulb, you must turn it a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Seat Arosa
There are two different ways to access the flashing lights. It depends on the different models, however accessibility can be done either from the outside or from the inside on a Seat Arosa. Access from inside the engine : To start, you have to open the hood. Then, it is necessary to loosen the cover using a screwdriver (frequently torx) to access the headlight unit. Now that the block is unscrewed, remove it and it is possible to change your bulb. Wheel arch access : Look under the wheel to see if the fixings are there. When this is the case, the fixings must be undone and the screws removed using a screwdriver. Then remove the headlight unit from your Seat Arosa gently from the front. Now you just have to change your bulb and put the block back in the opposite direction. Less frequently, on certain cars it is likely to remove the headlight unit from the outside. However, it is rather rare. When this is the case, using a screwdriver you will have to remove the fixings, remove the headlight block quietly and change your faulty bulb.
How to change the bulb of a rear indicator on a Seat Arosa
There are also two different ways to access this turn signal bulb. It can depend on the ranges but accessibility can be done either from inside or outside. Access from inside the trunk : Most of the time accessibility can be done from inside the trunk. Regarding the headlight blocks, there are screws and fixings. Remove them and remove the part slowly. Finally it is necessary to only change your faulty bulb with the new one. Then repeat this operation in reverse. It is also likely that accessibility is from the outside or through the wheel arch. However, it is much rarer. In all cases, you must take your screwdriver and carefully remove the entire headlight unit in order to change the bulb. To put it in place, carry out the opposite manipulation.