Using working flashing lights is a legal requirement. Remember, omitting a flashing light is punishable by 3 point on your driver's license as well as a traffic ticket . Although a few law enforcement officers are lenient on this from time to time. It is therefore essential to have flashing lights that work correctly. We will see in this article how to replace the bulb of a Suzuki Wagon R turn signal light, front and rear. It is also possible that the malfunction stems from a bad contact, but this is quite exceptional.
Suzuki Wagon R: things to know before replacing your turn signal
To begin with, it is essential to properly select the model of your bulb! So as not to be mistaken, we advise you to go to a spare parts website or to your mechanic who knows how to select them. Secondly, you have to think about selecting the right color for your bulb. Thereafter, you will need a tools very simple but nevertheless essential. You will therefore mainly need a screwdriver for a Suzuki Wagon R. A set of cruciforms and torxes and nothing can happen to you. Most of the time, the bulbs are bayonet . In order to take out the damaged bulb you must turn the bulb a quarter of a turn counterclockwise. In order to put the new bulb, you will therefore have to turn a quarter of a turn in the opposite direction.
How to change the bulb of a front turn signal on a Suzuki Wagon R
There are two main ways to get to the flashing lights. It depends on the different models, but the access can be done either from the outside or from the inside on this Suzuki Wagon R. Access from inside the engine : First of all, you will have to open your hood. And then you have to unscrew the cover with a screwdriver (most often torx) in order to access the light block. When the block is unscrewed, remove the latter and it is possible to replace this bulb. Wheel arch access : Look below the wheel to see if the fasteners are in this location. If so, you will need to remove the fasteners and remove the screws using a screwdriver. Secondly, gently remove the light block from the Suzuki Wagon R from the front. Now all you have to do is replace the bulb and put the light unit back in the other direction. More rarely, on some cars it is still possible to remove the light unit from the outside. But it is quite rare. If this is the case, with a screwdriver you will have to remove the fixings, release the light unit slowly and change the defective bulb.
How to change the bulb of a rear indicator on a Suzuki Wagon R
There are also two main ways to access this indicator bulb. It depends on the different types, however the access can be done either from inside or from outside. Access from inside the trunk : In most cases, access can be done from the boot. At the level of the light blocks, there are screws and fixings. Take them out and put down the block, being careful. Then you only have to change this defective bulb with the new one. And then reproduce the same manipulation in the other direction. It is also possible that the access can be from the outside or through the wheel arch. But it is much rarer. In any case, you will need to have your screwdrivers and carefully remove the headlight assembly assembly so as to replace the bulb. To set it up, do the opposite.