Using flashing lights that work remains mandatory. As a reminder, not putting a flashing light is liable to 3 point on your driver's license as well as a fine . Even if certain law officers are regularly sympathetic on this point. It therefore remains necessary to have indicators that work properly. We will see with this article how to replace the bulb of a flashing jeep wrangler light, front and rear. It is also conceivable that the concern comes from a false contact, however this remains relatively exceptional.
Jeep wrangler: things to know before replacing its indicator
Above all, it is wiser to choose the correct bulb model! In order not to be mistaken, we advise you to go to a spare parts site or to a mechanic who will be able to select them. In the second step, it is necessary to think about selecting the right color for your bulb. Then you will need to use a tools extremely simple but still necessary. You will therefore mainly need a screwdriver for a jeep wrangler. A game of cruciform and torx and you will be able to do it. In most cases, the bulbs are at bayonet . In order to remove the failed bulb you will need to rotate the bulb a quarter of a turn counterclockwise. To install the new bulb, it is then necessary to turn it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a jeep wrangler
There are two main ways to access the turn signals. Indeed, it depends on the different models, however access can be done either from the outside or from the inside on your jeep wrangler. Access from inside the engine : First of all, you will have to open your hood. Then, it is necessary to loosen a cover with a screwdriver (most often torx) to access the headlight unit. Once the block is unscrewed, remove it and do not hesitate to replace your bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. If this is correct, it is necessary to undo the fixings and remove the screws with a screwdriver. Then remove the headlight block from the jeep wrangler slowly from the front. All you have to do is replace the bulb and put the unit back the other way. More rarely, on certain models it is conceivable to remove the headlight unit from the outside. But it is relatively rare. If that's right, with a screwdriver you will have to disassemble the fasteners, remove the headlight unit quietly and replace the faulty bulb.
How to change the bulb of a rear indicator on a jeep wrangler
There are also two main ways to access the turn signal bulb. It depends on the different types but access can be done either from inside or outside. Access from inside the trunk : Most of the time access can be done from the trunk. For these light blocks, you will find screws and fasteners. Remove them and remove the block slowly. Then it is only necessary to replace your faulty bulb with a new one. Then repeat the same manipulation in reverse. It also remains conceivable that access can be from the outside or under the wheel arch. But it is much less frequent. Whatever happens, it is necessary to take your screwdrivers and carefully remove the entire block of lights in order to replace this bulb. To reassemble, take the opposite step.