Using flashing lights that work remains mandatory. Think about it, forgetting to put a turn signal is liable to 3 point on your driver's license as well as a traffic ticket . Even if some law enforcement officers are lenient at times on this subject. It is therefore important to have flashing lights that work properly. We will therefore find out in this article how to change the bulb of a flashing light for a Nissan Juke, front and rear. It is also conceivable that the problem comes from a short circuit, but this remains relatively rare.
Nissan Juke: things to know before changing your turn signal
To start with it is wiser to correctly buy the model of your bulb! In order not to be mistaken, it is advisable to go to a spare parts site or to a garage that knows how to select them. In a second step we will have to think about selecting the right color for the bulb. Then you will need to use a tools super simple but still essential. You will therefore mainly need a screwdriver for a Nissan Juke. A kit of cruciform and torx and you will necessarily be able to get there. Generally, the bulbs are at bayonet . In order to remove the defective bulb, it will have to be rotated by a quarter of a turn anticlockwise. To fix the new bulb, you will have to rotate it a quarter of a turn in the opposite direction.
How to change the bulb of a front indicator on a Nissan Juke
There are two different ways to get to the turn signals. It depends on the models, but accessibility can be done either outside or inside on a Nissan Juke. Access from inside the engine : First of all, you will have to open the hood. And then, you must loosen the cover with the help of a screwdriver (frequently torx) in order to access the headlight unit. When the unit is unclipped, remove it and it is possible to change the bulb. Wheel arch access : Inspect below the wheel to see if the fasteners are there. If so, you will need to undo the fasteners and remove the screws with a screwdriver. Then remove the headlight assembly from the Nissan Juke gently from the front. All you have to do is change your bulb and position the block in the opposite direction. Exceptionally, on some models it is conceivable to remove the headlight unit from the outside. But it is relatively rare. If this is the case, with the help of a screwdriver you will have to disassemble the fixings, gently remove the headlight unit and replace your faulty bulb.
How to change the bulb of a rear indicator on a Nissan Juke
There are also two different ways to access the turn signal bulb. It can depend on the different types, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : In most of the cases accessibility can be done from the trunk. For these light blocks, there are screws and fixings. Remove them and lay the block down slowly. Then you just need to replace the failed bulb with a new one. And then repeat this operation in the other direction. It also remains conceivable that accessibility is done from the outside or under the wheel arch. But it is much less frequent. Whatever happens, you are going to have to take your screwdrivers and gently remove the entire light unit in order to change this bulb. To put it in place, do the opposite.