Using working flashing lights remains a legal requirement. Think about it, omitting a flashing light is liable to 3 point on your driver's license as well as a traffic ticket . Although some police officers are sometimes complacent on this point. It is therefore important to have flashing lights that work properly. We will see with this article how to change the bulb of a turn signal on a Nissan Laurel, front and rear. It is sometimes possible that the malfunction comes from a short circuit, however this is quite exceptional.
Nissan Laurel: things to know before changing your turn signal
First of all, it is wiser to correctly choose the type of bulb! In order not to be mistaken, we advise you to go to a spare parts website or to your professional who will be able to order them for you. Then you have to be careful to select the right color of the bulb. Subsequently, you will need to use a tools very basic but still essential. So you will mainly need a screwdriver for a Nissan Laurel. A set of cruciforms and torxes and nothing can happen to you. Most of the time, the bulbs are bayonet . In order to take out the defective bulb you will have to turn the bulb a quarter of a turn to the left. In order to put the new bulb, you have to rotate it a quarter of a turn in the other direction.
How to change the bulb of a front turn signal on a Nissan Laurel
There are two main solutions to access the flashing lights. It depends on the model, however accessibility can be done either from the outside or from the inside on this Nissan Laurel. Access from inside the engine : First, you have to open your hood. And then you have to remove a cover using a screwdriver (regularly torx) in order to access the headlight block. When the block is unscrewed, remove it and do not hesitate to change the bulb. Wheel arch access : Check below the wheel to see if the clips are there. If this is what happens, you have to dismantle the fixings and remove the screws with the help of your screwdriver. Then remove the headlight unit of this Nissan Laurel delicately from the front. You simply need to change the bulb and replace the block by following the reverse procedure. More rarely, on some cars it is still possible to remove the headlight unit from the outside. However, it is quite rare. If this is what happens, using a screwdriver you will have to remove the fasteners, remove the headlight unit slowly and change the defective bulb.
How to change the bulb of a rear indicator on a Nissan Laurel
We can also find two main solutions to access your turn signal bulb. It may depend on the ranges, however accessibility can be done either from the inside or from the outside. Access from inside the trunk : In most cases accessibility can be done from the trunk. For these light blocks there are screws and fasteners. Remove them and remove the block being careful. Then you only have to change the defective bulb with the new one. And then repeat the same manipulation in the opposite direction. It is also possible that the accessibility could be from the outside or through the wheel arch. However, it is much less common. In all cases, you must bring your screwdrivers and gently remove the entire headlight assembly so as to change the bulb. To reassemble it, proceed in the opposite direction.