Having flashing lights that are in good condition is mandatory. Remember, forgetting to put a flashing light is liable to 3 point on your driver's license as well as a fine . Although some police officers are lenient at times on this subject. It therefore remains necessary to have flashing lights in good working order. We will see with this article how to replace the bulb of a indicator for Seat Tribu, front and rear. It is sometimes conceivable that the dysfunction comes from a false contact, nevertheless it remains rather exceptional.
Seat Tribu: things to know before replacing your turn signal
First of all, it is essential to choose the right type of bulb! In order not to be mistaken, we advise you to go to a spare parts site or to a garage that knows how to select them. Then you will have to be careful to choose the right color for the bulb. Then you will need to use a tools very basic but still necessary. You will therefore mainly need a screwdriver for a Seat Tribu. A cruciform and torx kit and nothing can happen to you. Almost every time, the bulbs are bayonet . In order to take out the broken bulb you will have to rotate the bulb a quarter of a turn anticlockwise. To install the new bulb, it is necessary to rotate a quarter of a turn in the other direction.
How to change the bulb of a front indicator on a Seat Tribu
There are two different solutions for accessing the flashing lights. It depends on the different models, however access can be done either from the outside or from the inside for a Seat Tribu. Access from inside the engine : First, you will need to open your hood. Then, it is necessary to remove a cover using a screwdriver (frequently torx) in order to access the headlight unit. As soon as the block is unscrewed, remove it and you can replace your bulb. Wheel arch access : Look below the wheel to see if the clips are there. If this is right, you have to undo the fasteners and remove the screws with the help of your screwdriver. Then remove the headlight unit from your Seat Tribu slowly from the front. All you have to do is replace your bulb and reattach the light block the other way. Less frequently, for certain cars it is conceivable to replace the headlight unit from the outside. Nevertheless it is quite rare. If this is right, using a screwdriver you will need to remove the fixings, release the headlight unit slowly and replace your burnt out bulb.
How to change the bulb of a rear indicator on a Seat Tribu
There are also two different solutions for accessing your turn signal bulb. It depends on the range, however access can be done either from inside or outside. Access from inside the trunk : Frequently access can be done from inside the trunk. Regarding the headlight blocks, you will find screws and fixings. Remove them and gently remove the part. Then it is necessary to simply replace your burnt out bulb with the new one. Then repeat this operation in reverse. It also remains conceivable that access can be from the outside or under the wheel arch. However, it is much less frequent. In all cases, take your screwdriver and gently remove the entire light unit to replace your bulb. To put it in place, proceed to the opposite manipulation.