When your injection system goes down breakdown it's very annoying. Generally, this is noticed with fuel fumes or a loss of power. The concern comes from the injectors? from the injection pump? We will answer these questions to best identify this concern. But at first, it is wiser to understand the principle of your injection system .
Injection system on a jeep wrangler: how it works
In order to function properly, the engine of the jeep wrangler requires a mixture of air and fuel. It is injector which gives the possibility of propelling this mixture into the engine. It is for this reason that if the injector has a problem, the jeep wrangler may not start. An injection system is composed of pumps and injectors , sometimes linked through a common rail . The very first injection engine was designed in 1893 by Rodolphe Diesel personally.
Injector problem on a jeep wrangler: origins and consequences
Lack of power or acceleration
If this jeep wrangler loses power, or has acceleration holes, it is certainly related to the injector. It is possible that it remains obstructed due to deposits. This is why it is essential to use quality fuel. Perform a descaling you will be less expensive than having the system replaced.
Fuel smell
When fuel fumes arrive, this is likely due to a fuite . When that's right, avoid riding with the jeep wrangler. Fuel leaks will be rare, however, quite serious. So call your auto repairer, he'll tell you what to do. When it is a joint, you will be able to try a repair. Hoping that the injector is not permanently out of service.
Engine runs but does not start
The problem does not necessarily come from the injector. The origins can be many. If on the other hand you feel certain that the injector is the cause, it is certainly related to the injection pump . It is possible that this is seized or else leak. You should know that replacing the injection pump of this jeep wrangler is quite expensive, it is actually wiser to properly grasp the concern.
Maintain the injection of your jeep wrangler
Here are some tips to avoid injection malfunctions.
- Buy one fuel of good quality.
- Take a ride for about fifteen minutes at 3000 rpm once every two months. The temperature emitted by the engine will unclog the components, as well as the injection while passing.
- Drain fairly regularly.
Now you know what are the malfunctions related to the injection of this jeep wrangler and some tips to work around them. If your problem persists, do not hesitate to go to a mechanic, since it is a very essential part of the engine. Leave us a comment in case this article on injection was useful to you. Enjoy the road!