As soon as this injection system falls into breakdown this remains extremely annoying. Often it is noticed with fuel fumes or loss of power. Does the malfunction come from the injectors? from the injection pump? We will answer these questions in order to correctly identify the dysfunction. But at first, it remains important to understand the operation of an injection system .
Injection system on an Opel Omega 2: how it works
To be able to function properly, the engine block of this Opel Omega 2 uses a mixture of air and fuel. It is injector which gives the possibility of sending this mixture inside the engine block. If the injector malfunctions, your Opel Omega 2 may not start. An injection system consists of a pumps and injectors , sometimes brought together by a common rail . The first injection engine block was developed in 1893 by Rodolphe Diesel himself.
Injector problem on an Opel Omega 2: origins and consequences
Lack of power or acceleration
If your Opel Omega 2 lacks power, or has acceleration holes, it is probably related to the injector. It is possible that the latter is dirty due to deposits. This is why it is wiser to use a qualitative fuel. Make a descaling is much cheaper than having this system replaced.
Fuel smell
When fuel fumes arrive, it certainly comes from a fuite . If this is the case, avoid driving with this Opel Omega 2. Leaks turn out to be infrequent but rather serious. So go to the garage, the latter will tell you what to do. If it's a joint problem, you can do a repair. Hoping that the injector is not permanently out of service.
Engine runs but does not start
The malfunction does not necessarily come from the injector. The origins will be diverse. If, on the other hand, you feel convinced that the injector is the cause, it is probably due to the injection pump . It is possible that this is seized or contain a leak. Remember that replacing the injection pump of your Opel Omega 2 is rather expensive, so it is important to correctly discern the malfunction.
Maintaining the injection of your Opel Omega 2
We now offer some methods to deal with injection problems.
- Select a fuel qualitative.
- Drive a quarter of an hour to 3000 rpm once every quarter. The temperature sent by the engine block should clean the components, as well as the injection on the way.
- Drain rather regularly.
Now you know what the problems will be in connection with the injection of your Opel Omega 2 and some techniques so as to anticipate them. If this malfunction continues, do not hesitate to go to a mechanic, because it is a very important element of the engine block. Leave a comment if this injection guide has been helpful. Good walk!