In the event that your injection system breaks down breakdown it is extremely unpleasant. In general, it is noticed with fuel odors or a lack of acceleration. The concern must come from the injectors? from the injection pump? We will answer these questions to best identify your concern. But first, it is essential to understand the principle of the injection system .tip-injector-Smart-Crossblade

Injection system on a Smart Crossblade: how it works

To function properly, the Smart Crossblade engine uses a mixture of air and fuel. It is injector which will propel this mixture into the engine. If the injector has a problem, the Smart Crossblade may have trouble starting up. An injection system is made of pumps and injectors , gathered at times via a common rail . The first injection engine was developed in 1893 by Rodolphe Diesel personally.

Injector problem on a Smart Crossblade: origins and consequences

Lack of power or acceleration

If the Smart Crossblade lacks power, or has acceleration holes, it is probably related to the injector. It is possible that the latter remains dirty due to waste. It is for this reason that it is essential to use a quality fuel. Make a descaling you will be much cheaper than having the system replaced.

Fuel smell

In the event that fuel odors are felt, this is likely due to a fuite . If that's the case, avoid driving with the Smart Crossblade. Leaks will be rare but quite dangerous. So go to the auto repairer, the latter will tell you what to do. If it is ever a joint, you can make a repair. Hopefully the injector is not permanently out of service.

Engine runs but does not start

The problem does not necessarily come from the injector. The origins will be many. If on the other hand you feel persuaded that the injector is the source, it is undoubtedly in connection with the injection pump . It is possible that the latter is seized or contains a leak. You should know that replacing the injection pump of the Smart Crossblade is quite expensive, it is therefore capital to properly discern the concern.

Maintain the injection of your Smart Crossblade

We now offer some tips for getting ahead of injection problems.

  • Choose one fuel of a very high quality.
  • Drive about 15 minutes at 3000 revolutions per minute 1 time every two months. The temperature generated by the engine will dust the components, as well as the injection obviously.
  • Drain fairly regularly.

Now you know what the problems are with injection of the Smart Crossblade and some methods to get around them. If this problem persists, you can go to a mechanic, because it is an extremely important part of the engine. Post a comment if this file on the injection was useful. Enjoy the road!