When the injection system falls into breakdown it is frankly unpleasant. Usually, it is distinguished by fuel effluxes or loss of acceleration. The problem comes from the injectors? from the injection pump? We will answer these questions to properly determine your problem. But above all, it is essential to grasp the operation of your injection system .injector-fault-Toyota-Auris

Injection system on a Toyota Auris: how it works

To be able to function properly, the engine block of your Toyota Auris uses a mixture of air and fuel. It is injector which gives the possibility of sending this mixture within the engine block. If the injector has a problem, your Toyota Auris may no longer start. An injection system is composed of pumps and injectors , gathered from time to time through a common rail . The first injection engine block model was developed in 1893 by Rodolphe Diesel himself.

Injector problem on a Toyota Auris: causes and consequences

Lack of power or acceleration

If your Toyota Auris ever loses power, or has power holes, it is certainly due to the injector. It remains likely that it is dirty due to waste. It is for this reason that it is useful to use a qualitative fuel. Make a descaling will be cheaper than having the system changed.

Fuel smell

When fuel effluxes are felt, it probably comes from a fuite . If this is what happens, avoid taking a ride with your Toyota Auris. Leaks will be exceptional, however, rather dangerous. So go to the mechanic, he will know what to do. If it's ever a joint, you can afford the repair. Hoping that the injector is not irretrievably HS.

Engine runs but does not start

The problem does not come automatically from the injector. The causes will be diverse. If however you are certain that the injector is the source, it is certainly due to the injection pump . It is possible that this is seized or else leak. You should know that changing the injection pump of your Toyota Auris is rather expensive, it is therefore essential to discern the problem.

Maintaining the injection of your Toyota Auris

Here are now some solutions to deal with injection malfunctions.

  • Buy one fuel qualitative.
  • Roll about fifteen minutes at 3000 rpm Once every two or three months. The heat sent by the engine block should clean the components, and the injection of course.
  • Drain rather often.

Now you know what the malfunctions are related to the injection of your Toyota Auris and certain techniques so as to avoid them. If your breakdown continues, do not hesitate to go to a mechanic, because it is a frankly essential element of the engine block. Leave a comment if this injection post helped you. Enjoy the road!