A light that goes off is not a good sign. We can believe that this is just a problem related to sensors . However, it is essential to pay attention to it. What is ABS used for? Why is the light on? What should be done? We will answer all of these questions, so you will be able to drive the hyundai matrix safely.indicator-abs-hyundai-matrix

What is ABS on a hyundai matrix

ABS stands for Anti Blocking System . It is a device that offers the possibility of improving braking, among other things for continuous braking. Before the creation of ABS, the brake pedal was directly connected to the pads. As soon as the pedal was depressed, the pads tightened on the discs. The trouble with this mechanism is that there is a chance of slippage. Using sensors, ABS calculated braking. Instead of being pressed on the discs, the pressure will oscillate several times in a very short time, in order to prevent a blocking overall wheels of your hyundai matrix. No skidding, and braking is more efficient.

hyundai matrix: why the ABS warning light is on

If the ABS warning light comes on, it is certain that the hyundai matrix presents a problem. As with all of the other LEDs, it is quite common for this to be just a contact problem. That said, it is better to be sure.

False contact

Reassemble the cables of the ABS probes of the hyundai matrix and measure the electric voltage with a multimeter . In the event that one of them does not have the same value as the other three, there is an electrical problem. Reassemble the line, if you find a connection fault you will have to repair it. When a cable is damaged, it will have to be replaced.

A sensor problem

This obviously remains a fairly common problem for a hyundai matrix. The sonar may be sending the wrong message. Then, it will be enough to replace the sensor in question. You can test the sensors with a oscilloscope .

A problem with the hydraulic block

The ABS of the hyundai matrix works thanks to a device hydraulic , which will manage the intensity of the brake pads. In the event that this device is defective, replacement of the ABS unit is usually necessary. In the event that this remains a block problem, it is usually felt when braking.

Conclusion

An ABS warning light that can be triggered can come from very different reasons. Either a sensor problem, a false contact. Assumed that the ABS unit is defective, it will probably have to be replaced. And this intervention is relatively expensive, for a hyundai matrix or for each car model. It is essential not to neglect an ABS warning light, for obvious safety reasons. You can write a comment in case this special ABS warning light article was useful. Good road!