A warning light that goes off is never a good omen. You might think it's just a concern from sensors . On the other hand, it is essential to pay attention to it. What is an ABS for? Why does the indicator light come on? what are the solutions? We will answer all of these questions so you can drive your Hyundai Neos 2 safely.
What is ABS on a Hyundai Neos 2
ABS stands for Anti Blocking System . It is a system which makes it possible to improve the braking system, among other things during continuous braking. Before the creation of ABS, the brake pedal was directly connected to the pads. When you depressed the pedal, the pads tightened on the discs. The inconvenience with this mechanism is that there is a chance of skating. Thanks to sensors, the ABS assesses the braking system. Instead of maintaining the discs, the pressure will decrease and then increase various times in a very short time, in order to prevent a blocking full tires of the Hyundai Neos 2. Not a single slip, and the braking is even more effective.
Hyundai Neos 2: why the ABS warning light is on
If the ABS warning light remains on, there is no doubt that the Hyundai Neos 2 has a problem. As on all the other LEDs, it is rather ordinary that it concerns just a problem of electrical connection. However, it is better to be sure.
False contact
Reassemble the cables of the ABS sensors of the Hyundai Neos 2 and measure the electrical voltage using a multimeter . In the event that one of them does not have the same value as the other three, there is a false contact. Reassemble the line, if you find a connection fault it will have to be repaired. When a cable is in poor condition, it will need to be replaced.
A sensor problem
This is obviously a fairly common concern for a Hyundai Neos 2. It happens that the sounder sends the wrong message. In this specific case, it will suffice to replace the sensor in question. You will be able to check the sensors using a oscilloscope .
A problem with the hydraulic block
Hyundai Neos 2 ABS works using a system hydraulic , which will make it possible to manage the pressure of the brake pads. In the event that this system is damaged, replacing the ABS unit is usually mandatory. If ever it is a bouldering problem, you can usually feel it when braking.
Conclusion
The ABS warning light which remains on can come from very different causes. Either a problem with the sensor, a false contact. Assuming that the ABS unit is not functional, it will probably need to be changed. And this intervention is rather expensive, for a Hyundai Neos 2 or for any other automobile model. It is essential not to neglect an ABS warning light, for obvious safety reasons. You can write a comment if this specific ABS warning light text was helpful. Enjoy again!