A light that is on is never a good omen. It is easy to think that it is only a concern from sensors . That said, it is essential to pay attention to it. What is ABS used for? Why is the light on? What to do? We will answer all these questions, this way you will be able to drive the Suzuki Splash safely.
What is ABS on a Suzuki Splash
ABS means Anti Blocking System . It is a device which makes it possible to improve the braking system, inter alia for continuous braking. Before the development of ABS, the brake pedal was simply linked to the pads. When pressed, the pads stick to the discs. The downside with this mechanism is that there is a risk of slippage. With the help of sensors, ABS calculated braking. Instead of holding the discs, the pressure will oscillate various times per second, which avoids a blocking overall wheels of your Suzuki Splash. No skating, and braking is even more efficient.
Suzuki Splash: why the ABS warning light is on
When the ABS warning light is on, it is certain that the Suzuki Splash has a problem. As with all the other indicator lights, it is quite common that it is only a concern for electrical connection. However, it's better to be sure.
False contact
Follow the wiring of the ABS sensors of the Suzuki Splash and take the electric current using a multimeter . If one of them does not have the same value as the other three, then there is an electrical fault. Reassemble the cables, if you find a bad connection you will have to correct it. If ever a wire is in bad condition, it will have to be changed.
A sensor problem
This naturally remains a fairly recurring concern on a Suzuki Splash. It happens that the detector sends an erroneous message. In this case, it will be enough to change the problematic sonar. You will be able to control the sensors using a oscilloscope .
A problem with the hydraulic block
The ABS of the Suzuki Splash works thanks to a mechanism hydraulic , which will manage the strength of the brake pads. If this mechanism is ever damaged, replacement of the ABS unit is often necessary. When it's a block problem, you can often feel it while braking.
Conclusion
An ABS warning light that trips can come from quite distinct reasons. Either a sonar problem, a false contact. If the ABS unit is non-functional, it will certainly have to be replaced. And this intervention is rather expensive, on a Suzuki Splash or on any type of vehicle. It is essential not to neglect an ABS warning light, for obvious safety reasons. Leave a comment if this specific ABS witness file has ever been useful to you. Enjoy the road!