A warning light that goes off is never a good sign. We can think that this is just a concern from sensors . However, it is essential to pay attention to it. What is the role of an ABS? Why does the warning light come on? What to do? We will answer all of these questions so that you can drive your Toyota Mirai with confidence.
What is ABS on a Toyota Mirai
ABS stands for Anti Blocking System . It is a device which offers the possibility of improving the braking system, in particular during continuous braking. Before the development of ABS, the brake pedal was directly linked to the pads. When you depressed the pedal, the pads tightened on the discs. The inconvenience with this system is that there is a risk of slippage. By means of the sensors, the ABS calculated the braking system. Instead of being pressed on the discs, the pressure will oscillate various times per second, which prevents a blocking complete the tires of your Toyota Mirai. No skidding, and braking is even more efficient.
Toyota Mirai: why the ABS warning light is on
If the ABS warning light remains on, there is no doubt that the Toyota Mirai has a problem. As on all the other witnesses, it is relatively common that it is just a concern of electrical connection. Still, it's better to be sure.
False contact
Trace the lines of the ABS sounders of the Toyota Mirai and take the electrical intensity with a multimeter . Assuming that one of them does not hold the same value as the others, there is a false contact. Reassemble the cables, if you find a connection fault it will have to be fixed. When a wire is damaged, it will have to be replaced.
A sensor problem
This is naturally a relatively common concern on a Toyota Mirai. It happens that the detector sends the wrong message. Therefore, it will suffice to replace the sensor concerned. You can check the sensors using a oscilloscope .
A problem with the hydraulic block
The ABS of the Toyota Mirai works by means of a mechanism hydraulic , which will make it possible to manage the force of the brake pads. In the event that this mechanism is damaged, changing the ABS unit is usually mandatory. If ever this is a problem with the block, you can usually feel it when braking.
Conclusion
The ABS warning light that comes on can have many different causes. Whether it is a sensor problem, an electrical fault. Assuming that the ABS unit is faulty, it will most likely need to be replaced. And this intervention is quite expensive, on a Toyota Mirai or on each vehicle model. It is essential not to neglect an ABS warning light, for obvious safety reasons. Do not hesitate to leave a comment if ever this special ABS warning light text has helped you. Enjoy again!