Your FAP warning light is on and you do not know what caused the problem. FAP is particularly found on cars Diesel, even if they are now found on gasoline automobiles. Just before trying to repairs on this Suzuki Jimny, it is essential to know what is causing this malfunction. How does a FAP work? Why is the light on? What are the most common problems? During this file, we will make a point by point topo. clairvoyant-fap-Suzuki-Jimny

What is a FAP for on your Suzuki Jimny

As its designation suggests, it is used to filter microscopic particles toxiques of the engine block. The particles are so tiny that they easily fit through your body. For your information, it is Peugeot who developed this FAP. The catalyst is used to restrict the amount of particles generated from the engine, then the particle filter collects the excess. It therefore seems essential to have a particle filter in good working condition in case you no longer want this Suzuki Jimny to pollute.

Why the FAP indicator light on your Suzuki Jimny

The FAP of your Suzuki Jimny is clogged

This is the most recurrent concern. No wonder, the particle filter clogs over time. Particles collect and hinder the evacuation of your exhaust gases. Normally, the particle filter in this Suzuki Jimny can purge itself and therefore expel this waste. However, if the latter is damaged, it must be changed.

An electronic problem

The concern with these indicator lights is that you are never certain that there is a concern. Undeniably, it often happens that an indicator light flickers while this Suzuki Jimny turns without problem. Your particle filter has electronic sensors which send a warning to the dashboard. If your probes are not working well and your particle filter is working properly, it is conceivable that your witness will go off.

What to do if the FAP indicator on your Suzuki Jimny lights up?

At first, it is completely illegal to remove the fap from your vehicle! It is an offense. You can check the sensors to see if they work well. If they ever work properly, the malfunction comes from the FAP. If it turns out to be dirty, you will be able to clean it by rolling in the towers for ten minutes. Do not accelerate too much either, the process may damage the vehicle. It is advisable to drive at 3000 rpm. The temperature of the engine block can therefore burn out the stored dirt, and therefore purify this particulate filter. If this combination does not work, it must be replaced by a new one.

Conclusion:

Your damaged particle filter will pollute but also cause loss of power. It remains necessary to replace it. Leave us a comment if our article was useful to you. Good road !