You have started, your vehicle runs smoothly. Then at the first intersection, you stall. With this article we are not talking about a problem at startup, but a cold problem. When the Citroen Tubik is a little idling when the engine is cold, it stalls. In this case, there is obviously a concern. We will therefore discover with this article what are the different situations so that the Citroen Tubik cold stalls systematically. Depending on the concerns, we will find out what methods can be applied. In all cases, this is a concern that must be taken very seriously for security reasons. It really makes more sense to go to your auto repairer.
The engine of the Citroen Tubik suddenly cuts off when cold
You have been meeting for a few minutes, the engine of your Citroen Tubik is cold. And it will suddenly go out. This is a concern that can be found on almost all vehicles. In this case, several components will have to be checked. The pressure regulator . When cold, the pressure in your engine is not always perfect. A regulator concern can therefore occur and cause pressure variations, and therefore engine shutdowns. Once the engine is warm, the pressure stabilizes and your Citroen Tubik no longer stalls. It will therefore be necessary to check the wear of the regulator and perform a replacement if necessary. An electronic problem . This is clearly the evil of our time. Electronics have many advantages in this area, but also negative sides. When your Citroen Tubik stalls cold, it can also be due to an electronic problem. A faulty sensor can emit a bad signal on injection, for example, and cause engine shutdowns. To be sure, a check via the suitcase will be the simplest. An injection fault . It is a concern that can occur both cold and hot. The consequences may vary depending on the type of concern. Indeed, it remains very complex to recognize a problem of injection on a Citroen Tubik. You should look at the proper functioning of all parts, injectors, pump, etc. It therefore remains advisable to have a more thorough check carried out by a professional. With this article we have seen the most common concerns of Citroen Tubik stalling cold. However, this list is endless. The reasons for the concerns are regularly various. Stalling for no reason is an indirect sign of engine malfunction. A simple sensor or a simple seal can be the cause. In all cases, it is necessary to continue the research and resolve this concern which may tend to worsen.