You've started, the car is running smoothly. Then at the first light, you stall. In this article we are not talking about a malfunction at startup, but a cold malfunction. When the Hyundai I30 (3rd Generation) N is idling slightly when the engine is cold, the vehicle stalls. Consequently, there is naturally a dysfunction. So we will see with this article what can be the different reasons for this Hyundai I30 (3rd Generation) N cold hold systematically. Depending on the malfunctions, we will find out what tips can be made. Whatever happens, it is a malfunction that must be taken very seriously for safety reasons. It is always better to go to your mechanic.
The engine of the Hyundai I30 (3rd Generation) N suddenly shuts down when cold
You have been driving for a while, the engine block of your Hyundai I30 (3rd Generation) N is cold. And it will suddenly cut. This is a malfunction that can be found on almost all vehicles. Therefore, some components will have to be checked. The pressure regulator . When cold, the pressure in the engine is not always the same. A regulator malfunction can therefore occur and cause pressure differences, and consequently engine shutdowns. Once the engine is warm, the pressure stabilizes and the Hyundai I30 (3rd Generation) N stops stalling. You must then look at the wear on the regulator and make a replacement if it is worn. An electronic problem . It is absolutely the evil of our time. Electronics have many advantages in this industry, but also disadvantages. If your Hyundai I30 (3rd Generation) N stalls cold, it can also be due to an electronic malfunction. A faulty sensor can send bad information to the injection for example, and cause engine shutdowns. To be sure, a check with the suitcase will be effective. An injection fault . It is a malfunction that can occur cold or hot. The consequences can fluctuate depending on the type of malfunction. Indeed, it is very complex to diagnose an injection malfunction for a Hyundai I30 (3rd Generation) N. You must check the proper functioning of all the parts, injectors, pump, etc. It is therefore recommended to have a more detailed inspection carried out by a technician. With this article we have seen the most common malfunctions of the Hyundai I30 (3rd Generation) N which stalls cold. Unfortunately, this list is endless. The causes of malfunctions are constantly diverse. Stalling for no reason is an indirect symptom of a malfunction of the engine block. A simple sensor or a simple seal can be the source of the problem. Whatever happens, you will have to continue the research and correct this dysfunction which may tend to worsen.