You turn on the ignition, the car works perfectly. And at the first crossing, you stall. In this article we are not talking about a malfunction on ignition, but a cold malfunction. When the Hyundai Kona is a little idling when the engine is cold, it stalls. In this case, there is naturally a malfunction. So we will see here what can be the main reasons for this Hyundai Kona cold hold systematically. Depending on the concerns, we will find out what tips can be applied. Whatever happens, it is a malfunction that must be taken seriously for safety reasons. It is always advisable to go to your auto repairer.calle-a-cold-Hyundai-Kona

Hyundai Kona engine suddenly shuts down when cold

You have been meeting for a few minutes, the engine block of your Hyundai Kona is cold. And the latter will suddenly go out. This is a malfunction that is found on almost all vehicles. In this case, various elements will have to be checked. The pressure regulator . When cold, the pressure in your engine is not necessarily identical. A regulator malfunction can thus occur and cause variations in pressure, and therefore engine shutdowns. Once the engine is warm, the pressure is regulated and the Hyundai Kona no longer stalls. It is therefore necessary to look at the state of the regulator and execute a replacement if necessary. An electronic problem . It is absolutely the evil of the 21st century. Electronics offer many advantages in this area, but also disadvantages. If your Hyundai Kona stalls cold, it may well be due to an electronic malfunction. A defective sensor can send a bad signal to the injection for example, and cause engine shutdowns. In order to see more clearly, control via the suitcase remains effective. An injection fault . It is a malfunction that can occur cold or hot. The consequences will sometimes fluctuate depending on the type of dysfunction. Indeed, it is very complex to determine an injection malfunction for a Hyundai Kona. You have to look at the condition of all the components, injectors, pump, etc. It is therefore advisable to have a more in-depth audit carried out by a professional. Here we have studied the most common concerns of the Hyundai Kona cold stalls. Unfortunately, this list is not exhaustive. The causes of the concerns are regularly different. Stalling for no reason is an indirect symptom of a malfunction of the engine block. A simple sensor or a simple seal can be the cause. Whatever happens, it is necessary to continue research and correct this dysfunction which may tend to worsen.