You have started, the car drives without worries. Then at the first light, you stall. With this article we are not talking about a problem at startup, but a cold problem. When the Hyundai Scoupe is slightly idling when the engine is cold, it stalls. In this case, there is naturally a concern. So we will see with this article what are the main causes for this Hyundai Scoupe to cold freeze systematically. Depending on the malfunctions, we will find out which tips can be applied. Whatever happens, it is a concern that must be taken seriously for safety reasons. It is always advisable to go to your auto repairer.
Hyundai Scoupe engine suddenly shuts down when cold
You have been driving recently, the engine of your Hyundai Scoupe is cold. And the latter will suddenly go out. This is a concern that is found on almost all vehicles. In this case, you have to look at several elements. The pressure regulator . When cold, the pressure inside the engine is not always the same. A regulator concern can therefore occur and cause pressure dissimilarities, and consequently engine shutdowns. Once the engine is warm, the pressure stabilizes and the Hyundai Scoupe stops stalling. It is thus necessary to look at the good state of the regulator and execute a change if necessary. An electronic problem . It is absolutely the evil of our time. Electronics have a large number of advantages in this area, but also disadvantages. When your Hyundai Scoupe stalls cold, it can also be due to an electronic problem. A worn sensor can transmit bad information on injection for example, and cause engine shutdowns. In order to see more clearly, a check with the suitcase will be the simplest. An injection fault . It is a concern that can happen cold as well as hot. The consequences will sometimes vary depending on the type of concern. In fact, it is difficult to determine an injection problem on a Hyundai Scoupe. You must check the correct functioning of all parts, injectors, pump, etc. It is therefore advisable to have a more in-depth audit carried out by a specialist. With this article we have studied the most common malfunctions of Hyundai Scoupe which stalls cold. Alas, this list is endless. The causes of malfunctions are constantly different. Stalling for no reason is a distorted signal of engine malfunction. A simple sensor or a simple seal can be the cause. Whatever happens, research must continue and correct this concern, which may tend to worsen.