You turn on the ignition, the car drives smoothly. And at the first light, the car stalls. In this article we are not talking about a problem at startup, but a cold problem. As soon as the Hyundai Tucson is a little idling when the engine is cold, it stalls. In this situation, there is obviously a problem. So we will see with this article what can be the different reasons for this hyundai tucson cold hold systematically. Depending on the malfunctions, we will find out which methods can be applied. In any case, it is a problem that must be taken seriously for safety reasons. It is always advisable to go to your mechanic.
The engine of the Hyundai Tucson suddenly cuts off when cold
You have been driving for a few minutes, the engine block of your hyundai tucson is cold. And the latter will suddenly cut. This is a problem that can be found on almost all vehicles. In this situation, there are various things to check. The pressure regulator . When cold, the pressure in your engine is not necessarily identical. A regulator problem can therefore arise and cause variations in pressure, and consequently engine shutdowns. Once the engine is warm, the pressure stabilizes and your hyundai tucson stops stalling. You will then have to look at the wear on the regulator and make a change if it is worn. An electronic problem . It is really the evil of our time. Electronics have many advantages in this area, but also negative sides. If your hyundai tucson is cold, it could also be due to an electronic problem. A defective sensor can transmit bad information on injection for example, and cause engine shutdowns. To find out, a check via the suitcase remains the simplest. An injection fault . It is a problem that can occur both cold and hot. The consequences can fluctuate depending on the type of problem. Indeed, it is difficult to recognize an injection problem on a hyundai tucson. It will be necessary to check the condition of all the components, injectors, pump, etc. It is therefore advisable to have a more in-depth audit carried out by a professional. With this article we have seen the most common malfunctions of hyundai tucson cold stalling. Unfortunately, this list is not exhaustive. The reasons for malfunctions are constantly diverse. Stalling for no apparent reason is an indirect signal of a malfunction of the engine block. A simple sensor or a simple seal can be the cause. In any case, it will be necessary to continue the research and resolve this problem which may worsen.