You turn on the ignition, your vehicle drives perfectly. Then at the first crossing, you stall. In this article we are not talking about an ignition problem, but a cold problem. When the jeep cherokee is slightly idling when the engine is cold, the vehicle stalls. Therefore, there is of course a concern. So we will see here what are the main reasons for this jeep cherokee cold hold regularly. Depending on the malfunctions, we will see which tips can be applied. Whatever happens, it is a concern that must be taken seriously for safety reasons. It is still better to go to your auto repairer.cold-jeep-cherokee

Jeep Cherokee Engine Shuts Down Suddenly When Cold

You have recently met, the engine block of the jeep cherokee is cold. And this one will suddenly cut. This is a concern that exists on almost all vehicles. Therefore, some components must be checked. The pressure regulator . When cold, the pressure in your engine is not necessarily the same. A regulator concern can thus occur and cause pressure differences, and therefore engine shutdowns. Once the engine is warm, the pressure stabilizes and the jeep cherokee stops stalling. It will therefore be necessary to check the wear of the regulator and perform a replacement if necessary. An electronic problem . It is really the evil of the 21st century. Electronics offer a lot of advantages in this area, but also weaknesses. When the jeep cherokee stalls cold, it can also result from an electronic problem. A deficient sensor can transfer bad information to the injection for example, and cause engine shutdowns. To find out, a check with the suitcase will be the simplest. An injection fault . It is a concern that can happen cold as well as hot. The consequences will sometimes vary depending on the type of concern. In fact, it is very complex to determine an injection problem on a jeep cherokee. We will have to check the condition of all parts, injectors, pump, etc. It is therefore advisable to have a more detailed check carried out by a specialist. Here we have studied the particularly common malfunctions of a cold-stalling jeep cherokee. Alas, this list is endless. The causes of malfunctions are constantly diverse. Stalling for no apparent reason is a distorted signal of a malfunction of the engine block. A simple sensor or a simple seal can be the source of the problem. Whatever happens, it will be necessary to continue the research and correct this concern which may tend to worsen.