You turn on the ignition, the car runs smoothly. And at the first light, you stall. In this article we are not talking about a problem at startup, but a cold problem. When the seat cordoba is slightly idling when the engine is cold, the vehicle stalls. In this case, there is naturally a concern. We will therefore see here what can be the main situations for the seat cordoba to cold hold systematically. Depending on the problems, we will find out what solutions can be made. Whatever happens, it is a concern that must be taken seriously for safety reasons. It really makes more sense to go to your mechanic.
The engine of the seat cordoba suddenly shuts down when cold
You have been driving recently, the engine of the seat cordoba is cold. And the latter will suddenly cut. This is a concern that is found on almost all vehicles. In this case, you have to look at several constituents. The pressure regulator . When cold, the pressure inside the engine is not necessarily identical. A regulator concern can consequently happen and cause pressure differences, and therefore engine shutdowns. Once the engine is warm, the pressure is regulated and the seat cordoba no longer stalls. It will then be necessary to check the condition of the regulator and carry out a replacement if it is worn. An electronic problem . It is really the evil of our time. Electronics has many benefits in this industry, but also weaknesses. If the seat cordoba stalls cold, it can also come from an electronic problem. A deficient sensor can transmit bad information on injection for example, and cause engine shutdowns. In order to see more clearly, a check with the suitcase is effective. An injection fault . It is a concern that can happen cold as well as hot. Symptoms will sometimes fluctuate depending on the type of concern. Indeed, it remains difficult to determine an injection problem for a seat cordoba. It will be necessary to check the condition of all the components, injectors, pump, etc. It is therefore recommended to have a more detailed audit carried out by a specialist. With this article we have seen the particularly prevalent cold seat cordoba problems. However, this list is endless. The reasons for the problems are often diverse. Stalling for no reason is a distorted signal of engine malfunction. A simple sensor or a simple seal can be the source of the problem. Whatever happens, we will have to continue the research and correct this concern which may tend to worsen.