You have started, your vehicle is running perfectly. And at the first crossing, you stall. Here we are not talking about a malfunction on ignition, but a cold malfunction. When the seat exeo is slightly idling when the engine is cold, it stalls. In this case, there is naturally a malfunction. We will thus see here what are the main causes for the seat exeo to cold hold systematically. Depending on the problems, we will find out what methods can be applied. Whatever happens, it is a dysfunction that must be taken very seriously for safety reasons. It is really more advisable to go to your mechanic.
The engine of the seat exeo suddenly shuts down when cold
You have been driving for a few minutes, the engine block of this seat exeo is cold. And the latter will suddenly go out. This is a malfunction that is found on almost all vehicles. In this case, you need to check a few components. The pressure regulator . When cold, the pressure in the engine is not always perfect. A regulator malfunction can consequently result in and cause pressure dissimilarities, and consequently engine shutdowns. Once the engine is warm, the pressure is regulated and the seat exeo stops stalling. You must then check the good condition of the regulator and make a change if necessary. An electronic problem . It is clearly the evil of the 21st century. Electronics have many advantages over the automobile, but also weaknesses. When this seat exeo stalls cold, it can also be due to an electronic malfunction. A worn sensor can send bad information to the injection for example, and cause engine shutdowns. To find out, a check via the suitcase is the simplest. An injection fault . It is a malfunction that can happen cold or hot. Symptoms can fluctuate depending on the type of dysfunction. It is indeed difficult to recognize an injection malfunction on a seat exeo. You have to look at the proper functioning of all the parts, injectors, pump, etc. This therefore remains recommended to have a more thorough audit by a technician. Here we have studied the particularly common seat exeo cold stalls. However, this list is not exhaustive. The causes of the problems are constantly different. Stalling for no reason is an indirect signal of a malfunction of the engine block. A simple sensor or a simple seal can be the cause. Whatever happens, research must continue and this dysfunction can get worse.