You turn on the ignition, your vehicle turns perfectly. And at the first intersection, the car stalls. With this article we are not talking about a malfunction at startup, but a cold malfunction. When the Seat Ronda is a little idling when the engine is cold, it stalls. In this case, there is obviously a malfunction. So we will see with this article what can be the main situations for this Seat Ronda cold hold systematically. Depending on the problems, we will find out what methods can be applied. Whatever happens, it is a malfunction that must be taken very seriously for safety reasons. It is really more advisable to go to your mechanic.
Seat Ronda engine suddenly shuts down when cold
You have recently met, the engine block of this Seat Ronda is cold. And this one will suddenly cut. This is a malfunction that is found on almost all vehicles. In this case, some components will have to be checked. The pressure regulator . When cold, the pressure inside the engine is not always the same. A regulator malfunction can thus occur and cause pressure differences, and consequently engine shutdowns. Once the engine is warm, the pressure stabilizes and the Seat Ronda stops stalling. It will therefore be necessary to look at the good condition of the regulator and make a change if necessary. An electronic problem . It is absolutely the evil of our time. Electronics have many advantages in this industry, but also negative sides. If this Seat Ronda stalls cold, it can also result from an electronic malfunction. A faulty sensor can transmit bad information on injection for example, and cause engine shutdowns. To be sure, checking with the suitcase is the simplest. An injection fault . It is a malfunction that can happen both cold and hot. The consequences may vary from the type of malfunction. Indeed, it is very complex to diagnose an injection malfunction for a Seat Ronda. You need to examine the condition of all parts, injectors, pump, etc. It is therefore advisable to have a more detailed diagnosis made by a specialist. Here we have studied the most common Seat Ronda cold stalls. Alas, this list is endless. The causes of the problems are frequently different. Stalling for no apparent reason is a distorted signal of a malfunction of the engine block. A simple sensor or a simple seal can be the cause. Whatever happens, it will be necessary to continue the research and resolve this dysfunction which may tend to worsen.