You turn on the ignition, your vehicle runs smoothly. Then at the first crossing, you stall. With this article we are not talking about an ignition problem, but a cold problem. As soon as the Suzuki Alto idles slightly when the engine is cold, the vehicle stalls. In this situation, there is obviously a problem. We will see with this article what can be the main reasons for this Suzuki Alto to cold hold regularly. Depending on the concerns, we will see what methods can be made. In any case, it is a problem that must be taken seriously for safety reasons. It is always best to go to your auto repairer.calle-a-cold-Suzuki-Alto

Suzuki Alto engine suddenly shuts down when cold

You have been driving for a while, the engine block of this Suzuki Alto is cold. And it will suddenly go out. This is a problem found on almost all vehicles. In this situation, we will have to look at various components. The pressure regulator . When cold, the pressure in the engine is not always the same. A regulator problem can thus occur and cause variations in pressure, and consequently engine shutdowns. Once the engine is warm, the pressure is regulated and the Suzuki Alto no longer stalls. It is then necessary to examine the condition of the regulator and make a replacement if it is worn. An electronic problem . This is clearly the evil of our time. Electronics have many benefits on the automobile, but also negative sides. If this Suzuki Alto stalls cold, it may well be due to an electronic problem. A worn sensor can transmit bad information on injection for example, and cause engine shutdowns. To be sure, a check via the suitcase will be the simplest. An injection fault . It is a problem that can occur cold or hot. The consequences will sometimes vary depending on the type of problem. In fact, it remains difficult to determine an injection problem on a Suzuki Alto. It will be necessary to look at the state of all the components, injectors, pump, etc. It is therefore recommended to have a more in-depth check carried out by a professional. Here we have seen the particularly widespread concerns of Suzuki Alto cold stalls. However, this list is not exhaustive. The reasons for the concerns are constantly diverse. Stalling for no apparent reason is a diverted symptom of a malfunction of the engine block. A simple sensor or a simple seal can be the source of the problem. In all cases, it will be necessary to continue the research and correct this problem which may tend to worsen.