You've started, the car is running perfectly. And at the first crossing, you stall. In this article we are not talking about a problem at startup, but a cold problem. As soon as the Toyota Corona is slightly idling when the engine is cold, it stalls. Therefore, there is of course a concern. So we will see with this article what are the different reasons for the Toyota Corona cold hold regularly. Depending on the malfunctions, we will find out what methods can be applied. In any case, it is a concern that must be taken seriously for safety reasons. It is always advisable to go to your auto repairer.
Toyota Corona engine suddenly shuts down when cold
You have recently met, the engine of your Toyota Corona is cold. And the latter will suddenly cut. This is a concern that exists on almost all vehicles. Therefore, you need to check various constituents. The pressure regulator . When cold, the pressure in the engine is not necessarily the same. A regulator concern can therefore occur and cause pressure differences, and therefore engine shutdowns. Once the engine is warm, the pressure stabilizes and the Toyota Corona no longer stalls. You must therefore check the condition of the regulator and make a change if it is worn. An electronic problem . It is clearly the evil of the 21st century. Electronics have many advantages in this industry, but also disadvantages. When your Toyota Corona stalls cold, it may well be due to an electronic problem. A faulty sensor can send a bad signal to the injection for example, and cause engine shutdowns. In order to see more clearly, a check with the suitcase will be effective. An injection fault . It is a concern that can occur cold or hot. The consequences will sometimes fluctuate depending on the type of concern. In fact, it is difficult to determine an injection problem for a Toyota Corona. We will have to look at the proper functioning of all the parts, injectors, pump, etc. It is therefore advisable to have a more suitable diagnosis carried out by a specialist. Here we have studied the most common malfunctions of Toyota Corona which stalls cold. Unfortunately, this list is not exhaustive. The causes of malfunctions are regularly different. Stalling for no apparent reason is an indirect signal of engine malfunction. A simple sensor or a simple seal can be the source of the problem. In any case, you will have to continue the research and correct this concern which may worsen.