You turn on the ignition, your vehicle turns perfectly. Then at the first light, the car stalls. With this article we are not talking about a malfunction on ignition, but a cold malfunction. When the Toyota Crown is idling a little when the engine is cold, the vehicle stalls. In this situation, there is naturally a dysfunction. We will see in this article what can be the different causes for the Toyota Crown to cold freeze systematically. Depending on the malfunctions, we will see what solutions can be provided. In any case, it is a malfunction that must be taken seriously for safety reasons. It is really advisable to go to your auto repairer.cool-to-Toyota-Crown

Toyota Crown engine suddenly shuts down when cold

You have recently met, the engine of the Toyota Crown is cold. And it will suddenly cut. This is a malfunction that exists on almost all vehicles. In this situation, several components must be checked. The pressure regulator . When cold, the pressure in the engine is not always perfect. A regulator malfunction can therefore occur and cause pressure variations, and therefore engine shutdowns. Once the engine is warm, the pressure stabilizes and your Toyota Crown no longer stalls. You must therefore look at the wear on the regulator and make a change if necessary. An electronic problem . It is absolutely the evil of our time. Electronics have a lot of advantages over the automobile, but also weaknesses. When the Toyota Crown stalls cold, it may well be due to an electronic malfunction. A faulty sensor can send bad information to the injection for example, and cause engine shutdowns. To be sure, a check with the suitcase will be the simplest. An injection fault . It is a malfunction that can happen both cold and hot. Symptoms may vary depending on the type of dysfunction. In fact, it remains difficult to diagnose an injection malfunction on a Toyota Crown. You should look at the condition of all parts, injectors, pump, etc. It is therefore advisable to have a more detailed diagnosis carried out by a professional. Here we have seen the most common malfunctions of the Toyota Crown cold stalls. However, this list is not exhaustive. The causes of the malfunctions are frequently different. Stalling for no apparent cause is an indirect symptom of engine malfunction. A simple sensor or a simple seal can be the source of the problem. In all cases, it will be necessary to continue research and correct this dysfunction which may tend to worsen.