You turn on the ignition, your vehicle runs smoothly. Then at the first light, the car stalls. In this article we are not talking about a problem at startup, but a cold problem. When the Toyota Rav 4 (2nd Generation) is slightly idling when the engine is cold, it stalls. In this case, there is obviously a problem. We will see with this article what are the different situations for the Toyota Rav 4 (2nd Generation) to cold hold systematically. Depending on the problems, we will find out what solutions can be applied. Whatever happens, it is a problem that must be taken seriously for safety reasons. It is always better to go to your mechanic.calle-a-froid-Toyota-Rav-4- (2e-Generation)

The engine of the Toyota Rav 4 (2nd Generation) suddenly cuts off when cold

You have been driving for a while, the engine of this Toyota Rav 4 (2nd Generation) is cold. And the latter will suddenly go out. This is a problem that can be found on almost all vehicles. In this case, some components will need to be checked. The pressure regulator . When cold, the pressure in your engine is not always the same. A regulator problem can consequently cause and cause pressure dissimilarities, and consequently engine shutdowns. Once the engine is warm, the pressure stabilizes and your Toyota Rav 4 (2nd Generation) no longer stalls. This will require checking the condition of the regulator and making a replacement if necessary. An electronic problem . It is clearly the evil of the 21st century. Electronics have a lot of benefits in this industry, but also weaknesses. If this Toyota Rav 4 (2nd Generation) stalls cold, it can also be due to an electronic problem. A worn sensor can send a bad signal to the injection for example, and cause engine shutdowns. To find out, a check via the suitcase will be the simplest. An injection fault . It is a problem that can occur cold or hot. The consequences will sometimes fluctuate with the type of problem. Indeed, it is complicated to diagnose an injection problem on a Toyota Rav 4 (2nd Generation). It will be necessary to check the proper functioning of all the parts, injectors, pump, etc. It therefore remains advisable to have a more thorough check by a technician. With this article we have seen the most common problems of the Toyota Rav 4 (2nd Generation) which stalls cold. Alas, this list is endless. The causes of the problems are constantly different. Stalling for no reason is a diverted symptom of engine malfunction. A simple sensor or a simple seal can be the source of the problem. Whatever happens, it is necessary to continue the research and correct this problem which may worsen.