You turn on the ignition, your vehicle runs smoothly. And at the first light, the car stalls. In this article we are not talking about a problem at startup, but a cold problem. When the Nissan Maxima is slightly idling when the engine is cold, it stalls. In this case, there is obviously a problem. We will see with this article what can be the different reasons for the Nissan Maxima cold hold systematically. Depending on the malfunctions, we will find out what solutions can be provided. In any case, this is a problem that must be taken very seriously for security reasons. It is always better to go to your auto repairer.
Nissan Maxima engine suddenly shuts down when cold
You have been driving for a while, the engine block of the Nissan Maxima is cold. And the latter will suddenly cut. This is a problem that can be found on almost all vehicles. In this case, it will be necessary to check several components. The pressure regulator . When cold, the pressure in the engine is not necessarily identical. A regulator problem can therefore occur and cause pressure variations, and consequently engine shutdowns. Once the engine is warm, the pressure stabilizes and the Nissan Maxima no longer stalls. It is thus necessary to check the good condition of the regulator and make a replacement if it is worn. An electronic problem . It is really the evil of the 21st century. Electronics have many advantages in this area, but also disadvantages. When the Nissan Maxima stalls cold, it can also be caused by an electronic problem. A faulty sensor can send bad information to the injection for example, and cause engine shutdowns. To be sure, a check via the suitcase will be effective. An injection fault . This is a problem that can happen both cold and hot. Symptoms can fluctuate depending on the type of problem. It is indeed difficult to diagnose an injection problem for a Nissan Maxima. You need to examine the condition of all parts, injectors, pump, etc. It is therefore recommended to have a further audit carried out by a technician. With this article we have studied the particularly common malfunctions of Nissan Maxima which stalls cold. Alas, this list is endless. The reasons for the malfunctions are frequently different. Stalling for no apparent reason is an indirect signal of a malfunction of the engine block. A simple sensor or a simple seal can be the cause. In any case, it will be necessary to continue the research and correct this problem which can get worse.