You turn on the ignition, your vehicle drives without problem. Then at the first light, the car stalls. With this article we are not talking about a starting problem, but a cold problem. As soon as the seat inca is slightly idling when the engine is cold, it stalls. Therefore, there is obviously a problem. So we will see here what can be the main reasons for this seat to cold hold regularly. Depending on the malfunctions, we will discover what tips can be made. In any case, it is a problem that must be taken seriously for safety reasons. It is really wiser to go to your auto repairer.
The seat inca engine suddenly shuts down when cold
You have been driving for a while, the engine block of your seat inca is cold. And this one will suddenly cut. This is a problem that exists on almost all vehicles. Therefore, you will have to look at various components. The pressure regulator . When cold, the pressure in the engine is not necessarily the same. A regulator problem can consequently occur and cause pressure dissimilarities, and consequently engine shutdowns. Once the engine is warm, the pressure stabilizes and the seat inca no longer stalls. You must therefore look at the wear on the regulator and make a change if it is worn. An electronic problem . This is clearly the evil of our time. Electronics have a lot of advantages over the automobile, but also disadvantages. If your seat inca cold stalls, it may also be due to an electronic problem. A faulty sensor can transfer a bad signal to the injection for example, and cause engine shutdowns. In order to see more clearly, a check with the suitcase is effective. An injection fault . This is a problem that can happen cold or hot. The consequences may vary depending on the type of problem. Indeed, it remains complicated to diagnose an injection problem on an Inca seat. You must check that all the parts, injectors, pump, etc. are working properly. It is therefore advisable to have a more thorough inspection by a professional. Here we have studied the particularly common malfunctions of seat inca which stalls cold. Alas, this list is endless. The causes of malfunctions are constantly diverse. Stalling for no reason is a diverted symptom of a malfunction of the engine block. A simple sensor or a simple seal can be the cause. In any case, it will be necessary to continue the research and correct this problem which can worsen.