Clutch and steering are the two mechanical systems that the driver controls. One nevertheless tends to deteriorate more quickly than the other: it is the clutch device of course. With in particular the gearbox, which goes with it. It happens quite regularly that concerns of gear changes occur on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the reason for the concerns. Also, this avoids at times having to change the entire kit. Here are the gearshift concerns The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is worn. However, this is not inevitably due to the whole of the clutch kit or gearbox of your + str (XXX) +. It happens that the problem comes from a link or a rubber which holds it. The problem can also come from the gearbox. It is possible to disassemble it to check that no foreign component is blocking it. If it is defective, it will have to be changed.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly frequent problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem comes from the clutch. In general it will be necessary to replace the entire clutch kit. You can always remove it and check the condition of all the components. As a reminder, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine stopped or running, it's really annoying. One thing to check is the condition of the gearbox of your + str (XXX) +. Chances are that it will be HS. To discern where the problem came from it's relatively easy. If you can push the lever into the guide of a speed, but the speed does not engage, it is the clutch that probably has a problem. If the lever seems to be blocked and you cannot push it, the problem is probably caused by the gearbox. In both cases, you will most likely have to replace one or more parts.