Clutch and steering are the two mechanical systems that the motorist controls. One nevertheless has the habit of getting damaged faster than the other: it is the clutch mechanism of course. With of course the gearbox, which goes with it. Quite frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the reason for the problems. Also, it avoids at times having to change the whole kit. These are the gear change issues The most common.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears does not pass any more. Or only even or odd speeds. Therefore, the clutch is worn. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. The problem may come from a link or a rubber that holds it. The problem can still come from the gearbox. It can be dismantled in order to check that no foreign component is blocking it. If the latter is damaged, you must change it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly common problem. Since the engine block is off, it is still possible to shift your gears, this implies that the gearbox of the + str (XXX) + is in good condition. Once the engine block has started, it is impossible. The problem comes from the clutch. Usually it will be necessary to change the entire clutch kit. You can always dismantle it and check the condition of all the components. For information, it is still advisable to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine off as on, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that the latter will be HS. In order to understand where the problem comes from it's relatively simple. If you can put the lever in the guide of one of the gears, but it does not engage, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In either case, you most likely need to change one or more parts.