Clutch and steering are two mechanical systems that the driver controls. One nevertheless tends to deteriorate faster than the other: it is the clutch mechanism naturally. With in particular the gearbox, which is closely linked. Relatively frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is frequently the cause, it can happen that we have surprises about the cause of the problems. Also, this sometimes avoids changing the complete kit. Here are consequently the gear change issues the most usual.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is in poor condition. However, this is not necessarily linked to the entire clutch kit or gearbox of your + str (XXX) +. The problem may come from a link or a rubber that holds it. The problem can also come from the gearbox. You can drop it to check that no foreign component is blocking it. If it is damaged, it will have to be changed.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly recurring problem. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is on, it is impossible. The problem must come from the clutch. In general it will be essential to replace the complete clutch kit. You can always remove it and check the condition of each of the components. For information, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off as on, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. In order to understand where the problem came from it's relatively easy. If you can push the lever in the guide of a speed, but the speed does not take, the clutch is probably the problem. If the lever seems to be stuck and you can't push it, the problem is probably with the gearbox. For both, it will most likely be necessary to replace one or more parts.