Clutch and steering are two mechanical systems that the motorist controls. One said that the habit of getting damaged faster than the other: it's the clutch system naturally. Obviously with the gearbox, in close connection. It happens quite frequently that gearshift concerns arise on the + str (XXX) +. And even if the clutch is often involved, it happens that we are surprised at the reason for the concerns. Also, this sometimes avoids changing the entire kit. So here are the gearshift concerns the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is damaged. However, this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber that holds it. The problem can also come from the gearbox. It is possible to deposit it to verify that no external element is blocking it. If it is damaged, it must be changed.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly frequent concern. Since the engine is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine is started, it is impossible. The concern must come from the clutch. Usually it will be essential to replace the entire clutch kit. You can always disassemble it and check the condition of each of the parts. For information, it is recommended to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine stopped as lit, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There may be a high probability that the latter will be out of service. To understand where the problem comes from it's quite simple. If you can push the lever in the guide of one of the speeds, but the speed does not take, it is the clutch which certainly holds a concern. If the lever seems blocked and you cannot push it, the problem certainly comes from the gearbox. In both cases, it is most certainly necessary to replace one or more parts.