The clutch and the steering are two mechanical devices that the driver controls. One has, however, a tendency to deteriorate more quickly than the other: it is the clutch device naturally. With in particular the gearbox, which goes with it. It happens quite regularly that gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is often involved, it sometimes happens that we are surprised at the source of the malfunctions. Also, it avoids from time to time having to change the entire kit. Here are the gearshift malfunctions The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It often happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is in poor condition. However, this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a rod or a rubber that holds it. The malfunction can also happen from the gearbox. It can be removed to check that no foreign component is blocking it. If it is defective, it will have to be replaced.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly frequent malfunction. Since the engine block is off, it is possible to shift gears, this means that the + str (XXX) + gearbox is operational. Once the engine block is on, it's impossible. The fault is with the clutch. Usually it will be advisable to replace the entire clutch kit. You can always remove it and check the condition of each component. For information, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears shift with the engine off or running, it's really annoying. The first thing to check is the condition of your str (XXX) + gearbox. There is a high probability that the latter is out of service. To understand where the dysfunction comes from is rather simple. If you can push the lever into a gear guide, but the gear does not engage, the clutch is probably malfunctioning. If the lever seems stuck and you cannot push it, the problem is probably with the gearbox. For both of them, it will most certainly be necessary to replace one or more parts.