Clutch and steering are the two mechanical systems that the motorist controls. One has said that it tends to wear out faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which is closely linked. Relatively frequently, gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we have surprises about the reason for the malfunctions. In addition, it sometimes avoids changing the entire kit. So here are the gearshift malfunctions the most usual.speed-pass-more-Opel-Movano-2

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is damaged. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. The problem may be caused by a link or a rubber that holds it. The problem can still come from the gearbox. You can drop it to check that nothing outside is blocking it. If the latter is defective, you must replace it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly frequent problem. Since the engine is off it is possible to shift your gears, it means that the gearbox of the + str (XXX) + is in good condition. Once the engine is running, it is impossible. The problem comes from the clutch. Usually it will be necessary to replace the entire clutch kit. You can try to remove it and look at the state of all the components. For information, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped as lit, it's really annoying. The first thing to look at is the state of the gearbox of your + str (XXX) +. There may be great chances that it will be HS. In order to understand where the problem comes from it is rather easy. If you can push the lever into the guide of one of the gears, but the gear does not engage, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem is certainly caused by the gearbox. For both, you most likely need to replace one or more parts.