The clutch and steering are the two mechanical devices that the driver steers. One, however, is used to deteriorating faster than the other: it is the clutch mechanism of course. In particular with the gearbox, in close connection. Relatively frequently, gearshift problems occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we have surprises about the reason for the problems. In addition, at times it avoids changing the entire kit. So here are the gear change issues the most common.speed-pass-more-Seat-Tango

+ str (XXX) +: Impossible to pass one of the speeds

It happens from time to time that one of the gears no longer changes. Or just even or odd speeds. As a result, the clutch is in poor condition. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. The malfunction may come from a link or from the rubber that holds it. The malfunction can also occur from the gearbox. You can drop it to check that nothing foreign is blocking it. If it is defective, you must replace it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a rather common malfunction. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is on, it is impossible. The malfunction comes from the clutch. Often it will be advisable to change the entire clutch kit. You can try to remove it and check the condition of all the components. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped or in running condition, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that it will be out of service. To discern where the malfunction comes from it's quite easy. If you can push the lever in the guide of one of the speeds, but the speed does not take, it is the clutch which probably holds a malfunction. If the lever seems blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, you most likely need to change one or more rooms.