Clutch and steering are two mechanical systems that the driver controls. One has said that it wears out faster than the other: it's the clutch system of course. With of course the gearbox, which is closely linked. It happens quite regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is frequently the cause, it is sometimes surprising that the reason for the problems. In addition, it avoids at times changing the complete kit. So these are the gear change issues the most regular.speed-pass-plus-Toyota-Fchv-4

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is in poor condition. But it is not inevitably due to the whole clutch kit or gearbox of your + str (XXX) +. It happens that the concern comes from a link or a rubber which holds it. The problem can also arise from the gearbox. You can remove it to check that no external component is blocking it. If it is damaged, it will have to be replaced.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common concern. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is operational. Once the engine block has started, it is impossible. The concern comes from the clutch. Usually it will be essential to replace the complete clutch kit. You can try to remove it and check the condition of each of the components. For information, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine stopped as lit, it's really unpleasant. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. In order to understand where the concern comes from, it's pretty easy. If you can push the lever in the guide of one of the speeds, but that this does not take, it is the clutch which probably has a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, it will most certainly have to replace one or more parts.