When your injection system goes down breakdown this remains extremely annoying. Usually it is distinguished by fuel fumes or loss of acceleration. The problem comes from the injectors? from the injection pump? We will answer these questions in order to properly determine the concern. But first of all, it remains important to grasp the principle of your injection system .
Injection system on a Hyundai Ix55: how it works
In order to function properly, the engine of this Hyundai Ix55 requires a mixture of air and fuel. It is injector which will allow this mixture to be shipped inside the engine. If the injector has a problem, the Hyundai Ix55 may no longer start. The injection system consists of a pumps and injectors , gathered regularly via a common rail . The very first injection engine was invented in 1893 by Rodolphe Diesel himself.
Injector problem on a Hyundai Ix55: causes and consequences
Lack of power or acceleration
If the Hyundai Ix55 lacks power, or even has acceleration holes, it is certainly linked to the injector. It is still possible that it remains dirty due to waste. It is for this reason that it is useful to use a qualitative fuel. Perform a descaling is less expensive than having this device replaced.
Fuel smell
In the event that fuel fumes are felt, it certainly comes from a fuite . If that's right, avoid driving with this Hyundai Ix55. Leaks are exceptional but quite dangerous. So call the mechanic, he will tell you what to do. If it is a joint, you will be able to repair it. Better that the injector is not permanently out of service.
Engine runs but does not start
The problem does not always come from the injector. There can be many causes. If however you ever feel certain that the injector is the cause, it is certainly because of the injection pump . It happens that this one is seized or have a leak. Note that replacing the injection pump of the Hyundai Ix55 is quite expensive, so it is important to correctly discern the concern.
Maintaining the injection of your Hyundai Ix55
Here are now several techniques to deal with injection concerns.
- Choose one fuel of good quality.
- Take a quarter of an hour 3000 rpm Once every two or three months. The temperature sent by the engine will then unclog the components, and the injection in passing.
- Drain fairly frequently.
Now you know what the concerns will be in connection with the injection of the Hyundai Ix55 and several techniques to avoid them. If this problem persists, you can go to a professional, because it is a really essential component of the engine. Post a comment if this injection guide has served you well. Good walk!