As soon as the injection system falls into breakdown it can be very annoying. In general, this is noticed by fuel effluxes or even a loss of acceleration. The problem must come from the injectors? from the injection pump? We will answer these questions to better identify the problem. But first, it can be crucial to understand the operation of an injection system .
Injection system on a hyundai lantra: how it works
In order to function properly, the engine block of this hyundai lantra needs a mixture of air and fuel. It is injector which gives the possibility of sending this mixture within the engine block. If the injector has a problem, the hyundai lantra may have trouble starting. The injection system consists of a pumps and injectors , sometimes brought together by a common rail . The very first injection engine block was developed in 1893 by Rodolphe Diesel himself.
Injector problem on a hyundai lantra: causes and consequences
Lack of power or acceleration
If your hyundai lantra lacks power, or has acceleration holes, it is probably due to the injector. It is conceivable that this one is obstructed because of waste. It is for this reason that it is useful to use a quality fuel. Perform a descaling will be much cheaper than having the device changed.
Fuel smell
When fuel effluxes are felt, this is likely due to a fuite . If this is the case, it is better to avoid driving with this hyundai lantra. Leaks are rare, however, quite dangerous. So go to the mechanic, he will tell you what to do. If it's a joint problem, you can afford the repair. Better that the injector is not completely out of service.
Engine runs but does not start
The problem does not necessarily come from the injector. The causes will be diverse. If ever you feel certain that the injector is the cause, it is probably related to the injection pump . It happens that it is seized or else have a leak. Be aware that changing the injection pump of your hyundai lantra is quite expensive, so it is essential to understand the problem.
Maintain the injection of your hyundai lantra
Here are now some methods to deal with injection malfunctions.
- Put one fuel of good quality.
- Roll about fifteen minutes at 3000 rpm once every two months. The temperature sent by the engine block should dust the components, and the injection in passing.
- Drain fairly frequently.
Now you know what will be the malfunctions related to the injection of your hyundai lantra and some tips to avoid them. In the event that this problem does not disappear, do not hesitate to go to a specialist, because it is an extremely essential element of the engine block. Post a comment in case this post on the injection was useful to you. Good road!