When your injection system goes down breakdown it's really annoying. Usually, it is distinguished by fuel odors or even a lack of power. The malfunction comes from the injectors? from the injection pump? We will answer these questions in order to best determine this dysfunction. But first of all, it is essential to grasp the principle of the injection system .injector-fault-Hyundai-Scoupe

Injection system on a Hyundai Scoupe: how it works

To operate properly, the Hyundai Scoupe engine uses a mixture of air and fuel. It is injector which will allow this mixture to be sent within the engine. If the injector malfunctions, your Hyundai Scoupe may no longer start. The injection system consists of a pumps and injectors , sometimes joined by common rail . The first injection engine was invented in 1893 by Rodolphe Diesel personally.

Injector problem on a Hyundai Scoupe: origins and consequences

Lack of power or acceleration

If your Hyundai Scoupe ever loses power, or even has power holes, it is probably due to the injector. It is possible that the latter is dirty due to deposits. This is why it is essential to use quality fuel. Perform a descaling will be less expensive than having the system replaced.

Fuel smell

When fuel odors are felt, it must probably come from a fuite . If this is the case, it is better to avoid driving with the Hyundai Scoupe. Leaks prove to be rare, however, relatively dangerous. So call your auto repairer, he will tell you what to do. If it's ever a joint problem, you can afford a repair. Hoping that the injector is not permanently broken.

Engine runs but does not start

The malfunction does not always come from the injector. The origins can be diverse. When on the other hand you are convinced that the injector is in question, it is probably due to the injection pump . It happens that the latter is seized or else leak. Note that replacing the injection pump of your Hyundai Scoupe is relatively expensive, it is therefore essential to correctly grasp the malfunction.

Maintaining the injection of your Hyundai Scoupe

These are now valuable tips to avoid injection concerns.

  • Select a fuel of good quality.
  • Take a quarter of an hour 3000 rpm once every quarter. The temperature produced by the engine will unclog the components, and the injection in passing.
  • Drain relatively often.

From now on, you know what will be the worries related to the injection of your Hyundai Scoupe and precious techniques if we want to avoid them. If your problem persists, you can go to a specialist, because it is a really important component of the engine. Leave a comment if you have ever used this injection guide. See you soon!