When this injection system falls in breakdown it's really unpleasant. Often it is distinguished by fuel fumes or a lack of acceleration. The malfunction comes from the injectors? from the injection pump? We will answer these questions in order to properly identify this dysfunction. But first, it is essential to grasp the principle of your injection system .
Injection system on a jeep compass: how it works
To be able to walk well, the engine of your jeep compass uses a mixture of air and fuel. It is injector which gives the possibility of sending this mixture inside the engine. If the injector malfunctions, the jeep compass may no longer start. An injection system consists of a pumps and injectors , gathered at times via a common rail . The very first injection engine was invented in 1893 by Rodolphe Diesel himself.
Injector problem on a jeep compass: reasons and consequences
Lack of power or acceleration
If ever the jeep compass lacks power, or has acceleration holes, it is probably related to the injector. It is possible that it remains dirty due to deposits. This is why it is essential to use a qualitative fuel. Perform a descaling is going to be a lot cheaper than having the system replaced.
Fuel smell
If fuel fumes are felt, it must certainly come from a fuite . When this is happening, it is best to avoid driving with your jeep compass. Leaks will be rare but rather dangerous. So go to the garage, he will tell you what to do. When it is a joint problem, you will be able to try a repair. Hoping that the injector is not permanently out of service.
Engine runs but does not start
The malfunction does not come automatically from the injector. The reasons can be many. However, when you are convinced that the injector is the source, it is probably due to the injection pump . It happens that the latter is seized or else have a leak. Remember that replacing the injection pump in the jeep compass is rather expensive; it is therefore essential to correctly identify the malfunction.
Maintain the injection of your jeep compass
Here are some methods to avoid injection problems.
- Put one fuel qualitative.
- Take a ride for about 15 minutes at 3000 rpm Once every three months. The heat sent by the engine will unclog the components, as well as the injection on the way.
- Drain rather regularly.
Now, you know what the problems will be in connection with the injection of the jeep compass and some tips to anticipate them. In the event that this malfunction persists, you can go to a mechanic, because it is a frankly important element of the engine. Leave us a comment if you have ever used this injection ticket. Good walk!