As soon as your injection system goes down breakdown it's very unpleasant. Usually it is distinguished by fuel fumes or a lack of acceleration. Does the malfunction come from the injectors? from the injection pump? We will answer these questions to best identify your dysfunction. But to start, it's important to understand the principle of your injection system .injector-seat-alhambra

Injection system on a seat alhambra: how it works

In order to function properly, the engine block of this seat alhambra uses a mixture of air and fuel. It is injector which allows this mixture to be sent to the engine block. It is for this reason that if the injector has a malfunction, the seat alhambra may have trouble starting. The injection system consists of a pumps and injectors , regularly linked by a common rail . The very first injection engine block was invented in 1893 by Rodolphe Diesel himself.

Injector problem on a seat alhambra: origins and consequences

Lack of power or acceleration

When this seat alhambra lacks power, or has power holes, it is probably due to the injector. It is possible that the latter is clogged due to waste. This is why it is useful to use a qualitative fuel. Make a descaling is cheaper than having this device replaced.

Fuel smell

When fuel fumes are felt, it probably comes from a fuite . If this is what is happening, it is better to avoid taking a ride with this seat alhambra. Leaks are exceptional but quite serious. So call the mechanic, he will know what to do. If it is ever a joint problem, you will be able to try the repair. Hoping that the injector is not completely out of service.

Engine runs but does not start

The malfunction does not always come from the injector. The origins will be diverse. If however you feel certain that the injector is the source, it is probably due to the injection pump . It may be seized or else leak. Note that replacing the injection pump of this seat alhambra is quite expensive, it is therefore important to correctly identify the malfunction.

Maintain the injection of your seat alhambra

Here are some solutions to get ahead of injection problems.

  • Put one fuel of a very high quality.
  • Drive about 15 minutes to 3000 rpm once every two or three months. The temperature generated by the engine block should unclog the components, as well as the injection on passage.
  • Drain quite often.

Now you know what the problems will be with the injection of this seat alhambra and some methods to get ahead of them. If your fault does not go away, do not hesitate to go to a professional, because it is a very important component of the engine block. Leave us a comment if this injection guide has ever been useful. Good walk!