When your injection system goes down breakdown it can be really annoying. In general, it is noticed with fuel effluxes or a loss of acceleration. The malfunction comes from the injectors? from the injection pump? We will answer these questions to best identify this dysfunction. But above all, it can be important to understand the principle of an injection system .injector-fault-Seat-Altea-Freetrack

Injection system on a Seat Altea Freetrack: how it works

In order to function properly, the engine block of the Seat Altea Freetrack uses a mixture of air and fuel. It is injector which propels this mixture into the engine block. It is for this reason that if the injector malfunctions, your Seat Altea Freetrack may have difficulty starting up. The injection system is made of pumps and injectors , sometimes linked by a common rail . The first model of injection engine block was designed in 1893 by Rodolphe Diesel personally.

Injector problem on a Seat Altea Freetrack: reasons and consequences

Lack of power or acceleration

When the Seat Altea Freetrack loses power, or has acceleration holes, it is certainly due to the injector. It remains likely that the latter remains dirty due to waste. It is for this reason that it is wiser to use a qualitative fuel. Perform a descaling You will be much cheaper than having this device replaced.

Fuel smell

In the event that fuel effluxes arrive, this certainly comes from a fuite . If this is the case, avoid driving with the Seat Altea Freetrack. Fuel leaks prove to be exceptional, however rather dangerous. So call your mechanic, he will explain what to do. If it is ever a joint problem, you can try the repair. Hopefully the injector is not clearly out of service.

Engine runs but does not start

The malfunction does not necessarily come from the injector. The reasons could be many. If however you feel confident that the injector is the cause, it is certainly due to the injection pump . It happens that the latter is seized or have a leak. Be aware that replacing the injection pump of the Seat Altea Freetrack is rather expensive, it is therefore important to correctly identify the malfunction.

Maintain the injection of your Seat Altea Freetrack

Here are now various methods to avoid injection malfunctions.

  • Put one fuel of good quality.
  • Drive a quarter of an hour to 3000 rpm once every two or three months. The heat produced by the engine block will then dust the components, as well as the injection while passing.
  • Drain rather frequently.

Now you know what will be the malfunctions related to the injection of the Seat Altea Freetrack and various methods if you want to avoid them. In the event that your problem continues, do not hesitate to go to a mechanic, because it is a frankly essential element of the engine block. Leave us a comment if this injection guide has ever helped you. Good road!