As soon as the injection system falls into breakdown it can be downright annoying. Often it is distinguished by the smell of fuel or loss of acceleration. The problem must come from the injectors? of the injection pump? We will answer these questions in order to best determine this concern. But to begin with, it may be essential to understand the principle of the injection system .tip-injector-Toyota-2000-Gt-Mf-12

Injection system on a Toyota 2000 Gt Mf 12: how does it work

In order to function properly, the engine block of this Toyota 2000 Gt Mf 12 uses a mixture of air and fuel. This is injector which gives the possibility of sending this mixture in the engine block. If there is a problem with the injector, your Toyota 2000 Gt Mf 12 could have trouble starting. An injection system consists of a pumps and injectors , sometimes linked by a common rail . The first injection engine block was developed in 1893 by Rodolphe Diesel himself.

Injector problem on a Toyota 2000 Gt Mf 12: reasons and consequences

Lack of power or acceleration

If the Toyota 2000 Gt Mf 12 loses power, or has acceleration holes, it is certainly related to the injector. It is possible that this one remains dirty because of the deposits. This is why it is wiser to use a quality fuel. Perform a descaling is cheaper than having this device replaced.

Fuel smell

When you smell fuel, it is most likely from a fuite . If this is what happens, avoid driving with this Toyota 2000 Gt Mf 12. Leaks will be infrequent, but relatively serious. So go to your mechanic, he will explain what to do. If it is a problem with the seal, you will be able to repair it. Better that the injector is not irreparably out of service.

Engine runs but does not start

The problem does not automatically come from the injector. The reasons could be many. In the event that however you feel convinced that the injector is the cause, it is certainly due to the injection pump . This may be seized or hold a leak. Note that replacing the injection pump of the Toyota 2000 Gt Mf 12 is relatively expensive, so it is essential to spot the problem.

Maintain the injection of your Toyota 2000 Gt Mf 12

We now offer various techniques to avoid injection problems.

  • Select a fuel of good quality.
  • Drive about fifteen minutes to 3000 rpm 1 time every two or three months. The heat emitted by the engine block should unclog the constituents, and the injection by the way.
  • Drain relatively regularly.

Now you know what are the problems related to the injection of the Toyota 2000 Gt Mf 12 and various techniques to avoid them. If your problem continues, you can go to a mechanic, simply because it is a very important part of the engine block. Leave us a comment if this post on injection was helpful. Enjoy the road!