When the injection system breaks down breakdown it remains extremely annoying. Often, this is noticed by the smell of fuel or a loss of acceleration. The problem comes from the injectors? of the injection pump? We will answer these questions to correctly identify the problem. But first, it is still essential to grasp the operation of your injection system .injector-fault-Toyota-Corolla-6

Injection system on a Toyota Corolla 6: how it works

To perform well, the engine in your Toyota Corolla 6 uses a mixture of air and fuel. It is injector which allows this mixture to be propelled into the engine. It is for this reason that if there is a problem with the injector, the Toyota Corolla 6 may have difficulty starting. An injection system consists of a pumps and injectors , linked regularly through a common rail . The first model of injection engine was invented in 1893 by Rodolphe Diesel personally.

Injector problem on a Toyota Corolla 6: reasons and consequences

Lack of power or acceleration

When your Toyota Corolla 6 loses power, or has power holes, it is certainly related to the injector. It is possible that this one is clogged because of deposits. This is why it is important to use quality fuel. Make a descaling will be cheaper than having the system replaced.

Fuel smell

If you smell fuel, it must probably be from a fuite . When that's it, avoid driving your Toyota Corolla 6. Leaks will be rare, but quite dangerous. So call the mechanic, he will tell you what to do. When it is a joint, you will be able to do the repair. Hopefully the injector is not completely out of service.

Engine runs but does not start

The concern does not necessarily come from the injector. The reasons may be diverse. When, however, you are convinced that the injector is the cause, it is certainly due to the injection pump . It may be seized or hold a leak. Note that replacing the injection pump in your Toyota Corolla 6 is quite expensive, it is therefore essential to correctly understand the problem.

Maintaining the injection of your Toyota Corolla 6

We now suggest some techniques to anticipate injection malfunctions.

  • Put one fuel qualitative.
  • Take a quarter of an hour 3000 rpm once every two months. The heat sent by the engine should dust off the components, as well as the injection by the way.
  • Drain fairly frequently.

Now you know what the injection malfunctions of your Toyota Corolla 6 will be and a few tips on how to avoid them. In the event that your fault remains, you can go to a mechanic, because it is a frankly essential component of the engine. Leave a comment if this article on injection was helpful to you. Enjoy the road!