When your injection system goes down breakdown it's very unpleasant. In general, it is noticed with fuel fumes or a loss of acceleration. Does the malfunction come from the injectors? from the injection pump? We will answer these questions in order to correctly determine your malfunction. But to start, it's important to understand the principle of the injection system .injector-fault-Toyota-Dyna

Injection system on a Toyota Dyna: how it works

To function properly, the engine block of this Toyota Dyna uses a mixture of air and fuel. It is injector which gives the possibility of propelling this mixture within the engine block. If the injector malfunctions, your Toyota Dyna may not start. An injection system consists of a pumps and injectors , joined regularly via a common rail . The very first injection engine block was developed in 1893 by Rodolphe Diesel personally.

Injector problem on a Toyota Dyna: causes and consequences

Lack of power or acceleration

When the Toyota Dyna loses power, or has power holes, it's probably related to the injector. It remains possible that the latter remains dirty because of deposits. It is for this reason that it is useful to use a quality fuel. Make a descaling is going to be much cheaper than having this device changed.

Fuel smell

When fuel fumes arrive, it is likely to be from a fuite . If that's right, it's best to avoid driving with this Toyota Dyna. Leaks will be exceptional but relatively serious. So call your auto repairer, he will tell you what to do. If it's a joint problem, you can afford the repair. Hopefully the injector is not irretrievably HS.

Engine runs but does not start

The malfunction does not always come from the injector. The causes can be many. If however you feel certain that the injector is the source, it is probably related to the injection pump . It happens that the latter is seized or else have a leak. Be aware that changing the injection pump of the Toyota Dyna is relatively expensive, so it is important to correctly discern the malfunction.

Maintaining the injection of your Toyota Dyna

Here are now various tips to counter injection malfunctions.

  • Choose one fuel qualitative.
  • Drive about 15 minutes to 3000 revolutions / minute Once every three months. The heat emitted by the engine block will unclog the components, and the injection passing.
  • Drain relatively regularly.

Now you know what will be the malfunctions related to the injection of the Toyota Dyna and various methods to get around them. In case this malfunction continues, do not hesitate to go to a specialist, because it is a really important element of the engine block. Leave us a comment if this injection article has served you well. See you soon!